FX Impact M3
The FX impact M3 is the latest model from the FX impact line. There are a number of points where the MK3 differs from the FX impact MK2. Like the FX maverick, the M3 has an extra regulator. The new model also has a larger power plenum. Finally, FX equipped the M3 with a new spring tension adjustment system (hammer spring).
Power Plenum FX Impact M3 Sniper
The M3 model has a power plenum of 72cc compared to 58cc of its predecessor. This has an advantage in particular for shooting slugs. Thanks to the larger power plenum, you have more power and speed for clear firing of slugs.
Thanks to the extra regulator, the pressure is distributed over two regulators instead of 1 regulator. This ensures that you have an even more consistent shot image. The regulators are equipped with the extremely accurate WIKA pressure gauges. A pressure difference of between 30 and 40 bar should be maintained between the regulators for optimal results.
Quick tune system
The external hammer spring adjusting wheel has been given a larger number of steps, namely 16 steps. This way you can always find the optimal setting for each type of ammunition.
Other features FX Impact M3 Sniper
This model is available in 5.5/6.35/7.62 or 9mm. This rifle comes standard with a 600mm smooth twist X barrel. Of course you can also make changes in caliber with this model. The shoulder pad is adjustable in height. The dual hole transfer port has various options, the position “P” is used for discharging standard pellets. Want to shoot slugs? Then turn the knob to “S”. The port has an enlarged opening so you have more power for firing slugs. The rifle is equipped with a 20MOA picantinny rail so that you can also adjust your rifle scope for longer distances. Very complete rifle!
|COCKING SYSTEM||Right hand positioned sidelever with an ambidextrous mount for lefthanded shooters.|
|MAGAZINE TYPE||Removable high capacity
38 shot when Cal .177
28 shot when Cal .22
28 shot when Cal .25
23 shot when Cal .30
18 shot when Cal .35
|STOCK||AR15 style grip
Adjustable recoilpad (vertically)
Smooth Twist X Superior Liner
4,5 (.177) Length 500 mm
4,5 (.177) Length 600 mm
5,5 (.22) Length 700 mm
9,00 (.35) Length 800 mm
|SHOT CAPACITY||4,5 (.177) ≈ up to 375 shots
5,5 (.22) ≈ up to 330 shots
6,35 (.25): ≈ up to 160 shots
7,62 (.30): ≈ up to 105 shots
9,00 (.35): ≈ up to 45 shots
|FILL PRESSURE||Max 250 bar (3625 psi)|
Picatinny rail with built in 20 MOA angle
|MUZZLE||Built-In Shroud system with additional moderator. (variations may occur depending on country).
Tripple pressure gauges:
Airtube pressure WIKA
|TRIGGER||Adjustable Match Trigger
Trigger blade can be adjusted in reach, height and rotated to set the blade in an angle.
|ENERGY||4,5 (.177): up to 47 J – 35 ft/lbs
5,5 (.22): up to 107 J – 79 ft/lbs
6,35 (.25): up 120 J – 89 ft/lbs
7,62 (.30): up to 168 J – 124 ft/lbs
9,00 (.35: up to 211 J – 156 ft/lbsNote: above figures are maximum FAC Power output using slug ammunition and slug powerkit.
|AIR CAPACITY||Compact: 300cc
Standard: 480 cc
9mm (.35): 580cc
Carbon fiber wrapped air tank
|LENGTH||Compact: 640mm – 25″
Standard: 860mm – 34″
Sniper: 1000mm – 39″
9mm (.35): 1120mm – 44″
|WEIGHT||Compact: 2,8kg – 6,10lbs
Standard: 3,1kg – 6,85 lbs
Sniper: 3,25kg – 7,15 lbs
9mm (.35): 3,35kg – 7,35 lbs
|CHARGING||Foster Quick Disconnect|
|MORE FEATURES||Dual AMP Regulators – Externally Adjustable
Quick Tune System (micro and macro adjustment of hammerspring tension)
Valve adjuster (valveflow tuning)
Interchangable Caliber System
Multiple Accessory rails (picatinny) sides and bottom
Accessory spot to mount angled pressure gauge
|PLENUM||Power Plenum 720 (72cc Volume) *not available on sub 12ft versions.|